疏水阀|疏水器|汽水分离器-北京疏水阀门厂
机械型
热静力型
热动力型
多重密封阀门
阀门
气体输送系统设备
凝结水回收系统解决方案
减温减压设备
管道附件
机械型
产品名称:倒吊桶式疏水阀 【在线订购 Online order
倒吊桶式疏水阀
INVERTED BUCKET TRAP
 
  倒吊桶式疏水阀
  倒吊桶式蒸汽疏水阀它是利用冷凝水和蒸汽密度差的工作原理,内部结构是由杠杆系统连接倒吊桶,克服蒸汽压力开关。倒吊桶式疏水阀内部是一个倒吊桶为液位敏感件,吊桶开口向下。装置刚启动时,管道内出现空气和低温冷凝水,此时疏水阀是全开放,空气和低温冷凝水迅速排出,装置很快提升温度。当蒸汽进入倒吊桶内,倒吊桶产生向上浮力,倒吊桶连接杠杆带动阀芯关闭阀门。倒吊桶上开有一小孔,能自动排空气,当一部份蒸汽从小孔排出,另一部份蒸汽产生凝结水,倒吊桶失去浮力向下沉,倒吊桶连接杠杆带动阀芯开启阀门。当蒸汽再进入倒吊桶内,阀门再关闭,循环工作,间断排水。
  倒吊桶式蒸汽疏水阀是机械型蒸汽疏水阀中最坚固的疏水阀之一,它的优点是:不怕水击,能连续排不冷凝气体,抗污性能好;最高背压≥90%,所有内件都是不锈钢制造,耐磨损、抗腐蚀;球形阀芯和阀座是线接触,密封性能好,使用寿命长;间断排水和连续排水,能排接近饱和温度冷凝水,使加热设备达到最佳工作效率。倒吊桶式蒸汽疏水阀的阀座处于水密封的保护下,工作时无新鲜蒸汽泄漏,节能效果好。
  它适用于石油、化工、印刷、造纸、制药等工业蒸汽加热设备和蒸汽管网的阻汽排水。
 
Inverted Bucket Trap
The interior of the inverted bucket steam trap: this valve adopts the operating principles of density difference between condensate water and steam, and the leverage system connects with inverted bucket to form its internal structure, thus controlling the open and close of the steam pressure. The interior of the inverted bucket steam trap is an inverted bucket, a liquid level sensitive part, with the bucket’s opening downward. When the device just started, air and low temperature condensate water occur in the pipes, at the moment the steam trap opens thoroughly, the air and low-temperature condensate water are discharged rapidly and the temperature of the device rises immediately. When any steam enters into the inverted bucket, the bucket will obtain buoyancy and the fixed lever of the bucket drives the valve core to close the valve. There is small aperture on the inverted bucket, which can discharge air automatically. As some of steam is discharged from such aperture, while other steam produces condensate water. The inverted bucket loses the buoyancy and sinks down and its fixed lever drives the valve core to open the valve. When the steam re-enters into the bucket, the valve will close again. It repeats the said procedures to discharge water intermittently.
The interior of the inverted bucket steam trap is one of the most strong steam traps among mechanical steam trap, and its strength are shown as follows: can resist water hammer and drain non-condensing air continuously, with good anti-pollution performance; the maximum back pressure being ≥90%; all internal parts are made of stainless steel with anti-abrasion and anti-erosion capability; the spheric valve core and valve seat realize line contact, with excellent sealing performance and long service life; it can drain intermittently and continuously and can discharge the condensate water that is nearly at saturation temperature to offer optimal work efficiency to the heating equipment, its steam trap valve seat is protected by water sealing, so no fresh steam will leak out during the operating process to obtain good energy-saving effects.
The product applies to such industrial steam heating equipment as petroleum, chemical, printing, paper making and pharmaceuticals and discharge of the steam pipe network.
 
优点:
1、内腔所有运动部件均为不锈钢,耐磨损,耐腐蚀。
2、由于蒸汽不能到达被水封的阀座孔,所以无蒸汽损失,高效节能。
3、浮桶倒置,不会被破坏压扁,不怕水击,寿命长。
4、倒置桶顶部设有排气孔,连续排空气性能好,不会形成冷滞后和气堵。
5、不受背压的影响,在高的背压下能很好地工作。
6、工作可靠,只有两个运动部件 (自由杠杆结构和倒置桶 ) ,故不会产生卡阻。
7、阀座与阀瓣在阀的顶部,阀瓣在开关中可以使污物通过,有良好的自我清洗性能 ,无污物困扰。
 
Merits
1. All moving parts of the internal cavity are made of stainless steel, capable of resistance to abrasion and erosion.
2. As the steam cannot reach the sealed aperture of the valve seat by water, the steam will not lose but has high efficiency and save energy.
3. The float bucket is located inversely. It can resist to water’s strike and has long service lift.
4. The invented bucket has gas vent and performance of discharging the air continuously is excellent, without forming cool hysteresis and air blocking.
5. It is free of the affect of the back pressure and can perform well under high back pressure.
6. It has reliable operation and only two moving parts—free lever structure and inverted bucket, so no blockage is produced.
7. The valve seat and valve disc are located at the top of the valve. The valve disc allows the pollutants to pass, so it attains good self-cleaning performance, without affected by pollutants.
 
[page_break]
倒吊桶式疏水阀
INVERTED BUCKET TRAP
技术参数/Technique parameter

壳体压力等级
Shell pressure grade
负荷泄漏率
Load leakage rate
使用介质
Used medium
排出高温气体
Discharging of high-temperature air
允许背压率
Permitted backpressure rate
节能效果
Energy saving effect
1.6、2.5、4.0MPA
≈0%
蒸汽、凝结水
Steam、Condensate water
适应
Adaption
≥90%
优秀
Excellence

处理污物
Disposal of feculence
最大工作压差
Maximum operating pressure differential
排水方式
Drainage method
最高允许温度
Maximum allowable temperature
排空气装置
Air exhaust system
抗水击
Resist
适应
Adaption
4.0MPA
连续方式
Continue mode
420℃
手动、自动
Manual、Automatic
适应
Adaption

主要零件材料/The materials of primary accessories

零部件名称Part and component name
材质Material
阀体、阀盖Valve body、valve cover
铸钢、不锈钢、合金钢Cast steel、Stainless steel、Alloy steel
吊桶、杠杆Inverted bucket、Lever
304/316不锈钢304/316 Stainless steel
阀座、阀瓣Valve seat、Valve clack
STL合金、高铬不锈钢STLAlloy、High chrome stainless steel
过滤网Filtrating screen
不锈钢Stainless steel

 
 
 
 
 
 
 
 
 
工作运转流程图     □空气 蒸汽 凝结水
 
1、疏水阀关闭:
疏水阀初始充水后,蒸汽开始进入疏水阀并在倒吊桶顶部积聚,把倒吊桶浮起,将阀瓣推入阀座。
 
Steam trap closes
The steam trap is filled with water first, steam begins to enter the steam trap and accumulates at the top of the inverted bucket, and then lifts the bucket upward, the valve disc is pushed into the valve seat.
 
2、疏水阀开始打开:
冷凝水开始流入疏水阀,蒸汽和空气被挤出倒吊桶,使桶渐失浮力,开始拉动阀瓣拉开阀座。
 
Steam trap starts to open
The condensate water starts to flow into the steam trap, steam and air are expelled from the inverted bucket, and the bucket will lose buoyancy gradually and begins to pull the valve disc to open the valve seat.
 
3、疏水阀排水:
当足够的冷凝水进入疏水阀,蒸汽和空气被挤出倒吊桶后,倒吊桶落下,将阀瓣拉离阀座,疏水阀向外推出冷凝水和空气。
 
Steam trap discharge water
When adequate condensate water enters into the steam trap, steam and air are expelled from the inverted bucket, and the inverted bucket drops to pull the valve disc away from the valve seat, the steam trap drives the condensate water and air outward.
 
4、疏水阀关闭:
在冷凝水停止流入后,蒸汽进入疏水阀并浮起倒吊桶,迫使阀瓣插入阀座,循环重复。
 
Steam trap closes
When the condensate water stop flowing in, steam enters into the steam trap and drifts the inverted bucket up to force the valve disc to insert into valve seat. These procedures repeat.
 
[page_break]
倒吊桶式疏水阀
INVERTED BUCKET TRAP
外型尺寸和重量/Prime out-form dimensions and weigh

产品型号
Product model
口径(DN)
Calibre
L法兰
Flange
螺纹/焊接
Thread/weldingL
H1
H2
W
重量(kg)
Weight
使用压力范围(Mpa)
Pressure change range
公称压力(Mpa)
Nominal pressure
81U
81UF
15~20
25
190
200
135
135
75
112
103
4.7
7.5
0.1-2.5·3.2
2.5-4.0
82U
82UF
15~25
32~50
240
260
180
 -
45
190
145
10
12~14
0.1-2.5·3.2
2.5-4.0
83U
83UF
15~25
32~40
50
300
310
320
215
215
-
124
198
178
17.5
22
23
0.1-2.5·3.2
2.5-4.0
84U
84UF
25
32~40
50
340
350
360
245
174
246
205
25
28
30
0.1-2.5·3.2
2.5-4.0
85UF
20~65
400
260
170
205
240
46
0.1-2.5·3.2
2.5-4.0
86UF
50~100
430
330
260
280
290
60
0.1-2.5·3.2
2.5-4.0

 
 
 
 
 
 
 
 
 
 
 
 

 

 

注解:
1、选型时请提供工作压力、工作压差、凝结水发生量、工作温度、连接方式及标准。
2、凝结水负荷的安全系数一般为2~3倍。
3、正确安装、定期保养清除阀内污物,保证疏水阀正常工作和延长使用寿命。
4、型号尾数数值相同,其排水量也相同。

Note
1. Please provide operating pressure and operating pressure difference, generating quantity of condensate water, operating temperature, connecting mode and standards in selecting product models.
2. The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life.
4. The products with same mantissa figure at their models have the same discharge capacity.

 
[page_break]
倒吊桶式疏水阀
INVERTED BUCKET TRAP
 
主要特点
1、对凝结水的发生量适应性强,即可间歇排放,又可连续排放。
2、汽水分离可靠,阀内始终处于水封状态,有效阻止蒸汽泄漏。
3、敞口型的浮子抗水击,设有排气孔,防止汽锁或气堵现象。
4、用于蒸汽主管、分汽缸、热交换器、硫化机、干燥机、空调机、医院用汽设备等。
 
Main Features
1. Have strong adaptive capacity to the occurrence quantity of condensation water, namely, the ability to both intermittent and continuous discharge.
2. Reliable separation of steam and water, the inner part of the valve is always in water seal state, which can effectively prevent the leakage of steam.
3. Open mouth-shaped float resists water attack, and is equipped with a vent so as to prevent vapor lock or gas block.
4. Mainly used in the steam main pipe, sub-cylinder, heat exchanger, vulcanizing machine, dryer, air-conditioning machine, hospital steam equipment, etc. 
 
 
技术参数/Technique parameter

产品型号
Product model
技术参数Technique parameter
阀体材料
Velve body material
PMA(Mpa)
最高允许温度(℃)
Maximum allowable temperature
适用介质
Used medium
ESH21(W/F)
碳钢
Carbon steel
6.4
425
蒸汽,凝结水
Steam,condensate water
ES5、ESU5、ESU5F
ES8B、ES10F、ES12N
碳钢
Carbon steel
2.5
425
蒸汽,凝结水
Steam,condensate water

 
 
 
 
 
 
 
 
 
 
主要零件材料/The materials of primary accessories

零部件名称Part and component name
材质Material
阀体、阀盖Valve body、valve cover
铸铁、WCB、不锈钢Cast-iron、WCB、Stainless steel
浮桶Bucket float
不锈钢Stainless steel
阀座、阀瓣Valve seat、Valve clack
不锈钢Stainless steel
吊钩、连接片Hook, connecting sheet
不锈钢Stainless steel
过滤网Filtrating screen
不锈钢Stainless steel

 
 
 
 
 
 
 
 
 
外型尺寸和重量/Prime out-form dimensions and weigh

产品型号
Product model
口径(DN)
Calibre
L法兰
Flange
螺纹/焊接Thread/weldingL
H1
H2
W
重量(kg)
Weight
使用压力范围(Mpa)
Pressure change range
公称压力(Mpa)
Nominal pressure
ESH5
15~25
210
110
60
70
75
3.5
0.1-1.6·2.1
2.5
ESH8(W/F)
15~25
210
135
85
90
100
5/7
0.1-1.6·2.1
2.5
ESH10(W/F)
20~50
260
200
120
134
120
10/15
0.1-1.6·2.1
2.5
ESH12(W/F)
20~50
290
220
105
140
120
14/17
0.1-1.6·2.1
2.5
ESH21(W/F)
15~50
310
300
130
150
200
28/34
0.1-2.1·4.5
6.4

 
 
 
 
 
 
 
 
 
 
 
 
 
[page_break]
倒吊桶式疏水阀
INVERTED BUCKET TRAP
优点:
1、对凝结水的发生量适应性强,即可间断排放,又可连续排放。
2、内部装有大排量的双阀座差压机和SCCV关闭系统,体积小而排量大。
3、内部零件全部采用不锈钢制造,并且安装在阀盖上维修保养极为方便。
4、背压率高(90%)。
5、汽水分离可靠(水汽经U型通道从阀下部进入),阀内始终处于水封状态,有效阻止蒸汽泄漏。
6、敞口形的浮子抗水击,吊桶上设有溢出排气孔,可有效防止蒸汽汽锁、空气气堵现象(非凝结性的高温空气也排除)。
7、与杠杆机构结合制造高压阀。
 
Merits
1.Strong adaptability to happening of condensate water, capable of intermittent or continuous discharge.
2.Equipped with double-valve pressure differentiator and SCCV shutdown system, with small size but large discharge capacity.
3.All inner parts made of stainless steel and mounted on valve covers, easy to maintain and repair.
4.High backpressure rate of 90%.
5.Reliable separation of vapor and water (vapor enters from the lower part of the valve through the U-shape passage), the inner part of the valve is in water seal state, which effectively prevents the leakage of steam.
6.Water-resistant open floater with gas vent through the bucket’s vent, effective to prevent steam locking or air blocking (except the non-condensed high-temperature air).
7.Suitable to be joined with lever mechanism for producing high-pressure valves.
 
技术参数/Technique parameter

壳体压力等级
Shell pressure grade
负荷泄漏率
Load leakage rate
使用介质
Used medium
允许背压率
Permitted backpressure rate
节能效果
Energy saving effect
排空气装置
Air exhaust system
2.5、4.0、6.4、12MPA
≈0%
蒸汽、凝结水
Steam、Condensate water
≥90%
优秀
Excellence
自动
Automatic

 

 

 

主要零件材料/The materials of primary accessories

零部件名称Part and component name
材质Material
阀体、阀盖Valve body、valve cover
铸钢、不锈钢、合金钢Cast steel、Stainless steel、Alloy steel
吊桶、杠杆Inverted bucket、Lever
304/316不锈钢304/316 Stainless steel
阀座、阀瓣Valve seat、Valve clack
STL合金、高铬不锈钢STLAlloy、High chrome stainless steel
过滤网Filtrating screen
不锈钢Stainless steel

 
 
 
 
 
 
 
 
外型尺寸和重量/Prime out-form dimensions and weigh

产品型号
Product model
口径(DN)
Calibre
L法兰
Flange
螺纹/焊接Thread/weldingL
H1
H2
H3
重量(kg)
Weight
使用压力范围(Mpa)
Pressure change range
公称压力(Mpa)
Nominal pressure
ER105(F)
15~25
32~50
270
270
200
155
155
134
134
-
10
13.5/15
0.1-1.6
2.5
ER110
15~25
32~50
310
310
-
220
220
165
165
-
19
23
0.1-1.6
2.5
ER116
15~25
32~50
310
310
-
220
220
165
165
-
19
23
0.1-2.5
4.0
ER120
32~65
400
340
220
217
-
46
0.1-2.5
4.0
ER25(W)
15~25
32~50
380
380
380
210
210
180
180
345
345
45
47
0.1-4.5·6.5
6.4-100

 
注解:
1、选型时请提供工作压力、工作压差、凝结水发生量、工作温度、连接方式及标准。,
2、凝结水负荷的安全系数一般为2~3倍。
3、正确安装、定期保养清除阀内污物,保证疏水阀正常工作和延长使用寿命。
 
Note
1. Please provide operating p, ressure and operating pressure difference, generating quantity of condensate water, operating temperature, connecting mode and standards in selecting product models.
2. The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life.
 
[page_break]
倒吊桶式疏水阀
INVERTED BUCKET TRAP
 
 
技术参数/Technique parameter

壳体压力等级
Shell pressure grade
负荷泄漏率
Load leakage rate
使用介质
Used medium
排出高温气体
Discharging of high-temperature air
允许背压率
Permitted backpressure rate
节能效果
Energy saving effect
4.0、22.0MPA
≈0%
蒸汽、凝结水
Steam、Condensate water
适应
Adaption
≥90%
优秀
Excellence

处理污物
Disposal of feculence
最大工作压差
Maximum operating pressure differential
排水方式
Drainage method
最高允许温度
Maximum allowable temperature
排空气装置
Air exhaust system
抗水击
Resist
适应
Adaption
4.0-10.0MPA
间接方式
Indirect way
420℃
自动
Automatic
适应
Adaption

 
主要零件材料/The materials of primary accessories

零部件名称Part and component name
材质Material
阀体、阀盖Valve body、valve cover
铸钢、不锈钢、合金钢Cast steel、Stainless steel、Alloy steel
吊桶、杠杆Inverted bucket、Lever
304/316不锈钢304/316 Stainless steel
阀座、阀瓣Valve seat、Valve clack
STL合金、高铬不锈钢STLAlloy、High chrome stainless steel
过滤网Filtrating screen
不锈钢Stainless steel

 
外型尺寸和重量/Prime out-form dimensions and weigh

产品型号
Product model
口径(DN)
Calibre
L法兰
Flange
螺纹/焊接
Thread/weldingL
H
H1
W
重量(kg)
Weight
使用压力范围(Mpa)
Pressure change range
公称压力(Mpa)
Nominal pressure
WDVER411F
15~50
495
-
495
-
280
-
0.1-10.0
15
DT421
15~25
-
310
115
165
210
-
 
 
DT1811
15~25
-
110
166
140
73
-
0.1-2.8
4.0
DT1812
15~25
-
130
230
190
108
-
0.1-4.5
6.4

[page_break]
倒吊桶式疏水阀
INVERTED BUCKET TRAP
 
技术参数/Technique parameter

壳体压力等级
Shell pressure grade
负荷泄漏率
Load leakage, rate
使用介质
Used medium
排出高温气体
Discharging of high-temperature air
允许背压率
Permitted backpressure rate
节能效果
Ener, gy saving effect
2.5、4.0、6.4MPA
≈0%
蒸汽、凝结水
Steam、Condensate water
适应
Adaption
≥90%
优秀
Excellence

处理污物
Disposal of feculence
最大工作压差
Maximum operating pressure differential
排水方式
Drainage method
最高允许温度
Maximum allowable temperature
排空气装置
Air exhaust system
抗水击
Resist
适应
Adaption
4.5MPA
间接方式
Indirect way
420℃
自动
Automatic
适应
Adaption

主要零件材料/The materials of primary accessories
 
零部件名称Part and component name
材质Material
阀体、阀盖Valve body、valve cover
铸钢、不锈钢、合金钢Cast steel、Stainless steel、Alloy steel
吊桶、杠杆Inverted bucket、Lever
304/316不锈钢304/316 Stainless steel
阀座、阀瓣Valve seat、Valve clack
STL合金、高铬不锈钢STLAlloy、High chrome stainless steel
过滤网Filtrating screen
不锈钢Stainless steel
 
外型尺寸和重量/Prime out-form dimensions and weigh

型号(螺纹和承插焊)
Model (screw thread
and socket welding)
型号(法兰)
Model (flange)
管道连接mm
Pipe connection
 
 
Amm
 
 
Bmm
 
 
BBmm
 
 
Gmm
 
 
Kmm
螺栓数量
Number of bolts
重量(螺纹和承插焊)kg
Weight (screw thread
and socket welding) kg
重量(kg)
Weight
31L
31LF
15,20
117
202
306
78
14.3
6
4.5
5.4
32L
32LF
15,20,25
171
259
313
121
31.7
6
13.6
14.5
33L
33LF
15,20,25
203
292
352
130
  36.5
8
22.7
23.1
34L
34LF
25,32
219
348
408
146
36.5
8
31.8
33.1
35L
35LF
25,32,40
248
381
446
168
44.4
9
44.5
46.1
36L
36LF
40,50
302
435
500
213
54.0
10
81.2
83.5

 

           

     
先导活塞浮球蒸汽疏水阀高压倒吊桶式疏水阀在线订购 Online order】 【打印 Print】 【返回 Back
Home | About Us | News | Products | Contacts